Mounting the FOX USB Extender
ATTENTION:
Installation and service must be performed by authorized personnel only.
Any of the units can be placed on a tabletop or behind a display, mounted on a rack shelf,
or mounted under or through a desk or other furniture. The receiver can be mounted to a
projector bracket.
Tabletop Use
Affix the four included rubber feet to the bottom of the unit and place it in any convenient
location.
Mounting
If desired, mount the unit using any of the following optional kits:
•
RSF 123 3.5-inch deep rack shelf kit (part number
60-190-20
)
•
RSB 123 3.5-inch deep rack shelf (part number
60-604-21
)
•
RSU 126 6-inch deep universal rack shelf kit (part number
60-190-10
)
•
RSB 126 6-inch deep basic rack shelf (part number
60-604-11
)
•
RSU 129 9.5-inch deep universal rack shelf kit (part number
60-190-01
)
•
RSB 129 9.5-inch deep basic rack shelf (part number
60-604-02
)
•
MBB 100 Back of the rack mounting kit (part number
70-367-01
)
•
MBU 125 under-desk mounting kit (part number
70-077-01
)
•
MBD 129 through-desk mounting kit (part number
70-077-02
)
•
PMK 300 projector mount kit (part number
70-374-01
)
•
PMK 350 low profile projector mount kit (part number
70-563-03
)
Follow the instructions included with the kit.
UL Guidelines for Rack Mounting
The following Underwriters Laboratories (UL) guidelines pertain to the installation of a
FOX USB Extender unit into a rack.
1.
Elevated operating ambient
— If installed in a closed or multi-unit rack assembly,
the operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consider installing the equipment in an environment compatible
with the maximum ambient temperature specified by Extron (Tma = +122 °F [+50 °C]).
2.
Reduced air flow
— Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
3.
Mechanical loading
— Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
4.
Circuit overloading
— Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits might
have on overcurrent protection and supply wiring. Appropriate consideration of
equipment nameplate ratings should be used when addressing this concern.
5.
Reliable earthing (grounding)
— Reliable earthing of rack-mounted equipment
should be maintained. Particular attention should be given to supply connections other
than direct connections to the branch circuit (such as the use of power strips).
FOX USB Extender • Reference Information
12
Содержание FOX USB Rx (MM)
Страница 4: ......
Страница 6: ...FOX USB Extender Contents vi...
