Extron electronics FOX R USB, Руководство пользователя, Страница: 19 / 28

Cabling and Setup
USB
USB
Host
Computer
Four female USB 2.0 compatible type A
connectors p5 VDC at up to
500 mA to connected USB peripherals.
Transmitter
Receiver
SM or MM Fiber Cable
HOST
INPUT
POWER
12V
1.0A MAX.
OPTICAL
Rx Tx
Ground
+12 VDC
External
Power Supply
(12 VDC, 1 A )
G G
Ground
+12 VDC
External
Power Supply
(12 VDC, 1 A )
G
G
1A MA
X
100-240V 50-60Hz
1A MA
X
100-240V 50-60Hz
POWER
12V
1.0A MAX.
OPTICAL
Rx Tx
1
2
3
4
OUTPUTS
Keyboard
Figure 7. FOX T-R USB Extender Plus Connection Guide with Two External
Supplies
Installation Overview
ATTENTION:
• Installation and service must be performed by authorized personnel only.
• L’installation et l’entretien doivent être effectués par le personnel autorisé
uniquement.
For proper operation, the transmitter, receiver, USB host, and peripherals must be
connected properly as shown in figure 7 and in the sequence described below.
1. (Optional) Mount the transmitter to a rack or furniture, following the directions provided
with the mounting kit (see
Mounting on page 19).
2. Power off the transmitter and receiver, and ensure all peripheral USB devices are
disconnected.
3. Connect the fiber optic cable appropriate for your extender model (singlemode or
multimode) between the LC SFP port of the transmitter and that of the receiver (see
Connecting the Fiber Optic Cable on the next page).
FOX T/R USB Extender Plus • Installation and Operation 11