Extron electronics FOX 4G Matrix 14400, Руководство пользователя

Страница: 34 / 105

3-9
FOX 4G Matrix 14400 Switcher • Programmer’s Guide
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Create ties
N
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*8$.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).
• The ! tie command, & tie command, and % tie command can be used interchangeably.
• The ! tie all command, & tie all command, and % tie all command can be used interchangeably.
Tie input
X!
to output
X@ X!
*
X@
! Out
X@
•
In
X!
•
All
]
Tie input
X!
to output
X@
.
Example: 1*3!
Out003 • In001 • All
]
Tie input 1 to output 3.
Tie input
X!
to output
X@ X!
*
X@
& Out
X@
• In
X!
• RGB
]
Example (see Note, above):
10*4&
Out004 • In010 • RGB
]
Tie input 10 to output 4.
Tie input
X!
to output
X@ X!
*
X@
% Out
X@
• In
X!
• Vid
]
Example (see Note, above): 7*5%
Out005 • In007 • Vid
]
Tie input 7 to output 5.
Quick multiple tie
E
+Q
X!
*
X@
!...
X!
*
X@
!
}
Qik
]
Example:
E
+Q3*4!3*5%3*6!
}
Qik
]
Tie input 3 to output 4,
tie input 3 to output 5,
and tie input 3 to output 6.
Tie input to all outputs
X!
*! In
X!
•
All
]
Example: 5*!
In005 • All
]
Tie input 5 to all outputs.
Tie input to all outputs
X!
*& In
X!
• RGB
]
Example (see Note, above):
8*&
In008 • RGB
]
Tie input 8 to all outputs.
Tie input to all outputs
X!
*% In
X!
• Vid
]
Example (see Note, above): 10*%
In010 • Vid
]
Tie input 10 to all outputs.
Read ties
N • The ! view tie command and & view tie command for RGB and the % view tie command for video can be used
interchangeably.
• When the switcher is in verbose mode, the response is Out
X@
• In
X!
• (All)(RGB) or (Vid)
]
.
View output tie
X@
!
X!]
Input
X!
is tied to output
X@
.
View RGB output tie
X@
&
X!]
Input
X!
is tied to output
X@
.
View video output tie
X@
%
X!]
Input
X!
is tied to output
X@
.
List input link detection
N
The switcher reports the link status for only as many inputs as are supported by the highest numbered slot with an I/O
board installed. The switcher does
not
recognize gaps in the board installation. For example, if boards are installed,
in only slots 1 and 3, leaving slot 2 empty, the switcher returns link status for 48 sequential inputs. The input link
response for the inputs supported by the board in slot 3, inputs 17 through 32, are all zeroes.
View all input connections 0LS
X#
1
X#
2
X#
3
...
X#
n
]
Each
X#
response is the
connection status of all
inputs, starting from input 1.
n is the highest-numbered
installed output.
Example:
0LS
Input:
Response Status:
no input detected
0 0 0 1 1 1 0 . . . 0
input detected
1 2 3 4 5 6 7 n
Command/response table for SIS
™
commands
N
X!
= Input number 000 – 144 (000 = untied)
X@
= Output number 001 – 144
X#
= Connection status 0 = no input connected 1 = input connected