Extron electronics eLink 100 Скачать руководство пользователя страница 1

IMPORTANT:

Refer to www.extron.com for the complete 

user guide, installation instructions, and 

specifications before connecting the 

product to the power source.

IMPO

RTAN

T:

Go to www

.extron.com f

or the complete 

user guide

, installation instructions,

 and 

specifications bef

ore connecting the 

product to the po

wer sour

ce.

eLink 100 • Setup Guide

The Extron eLink 100 T (transmitter) and eLink 100 R (receiver) units wirelessly extend HDMI signals up to 100 feet (30 m) with 
a clear line-of-sight. Up to four receivers can be linked to a single transmitter, allowing the HDMI video from one source to be 
output on multiple displays simultaneously.
This guide provides instructions for setting up and operating the eLink 100 transmitter and receiver (sold separately).

ATTENTION:

 

• 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment 
should be installed and operated with minimum distance 20 cm (7.9 inches) between the radiator and your body.

• 

Cet équipement est conforme aux limites de radiation de la FCC établies pour un environnement non géré. Il doit être 
installé et contrôlé à une distance minimale de 20 cm (7,9 pouces) entre le radiateur et votre corps.

Mounting

The eLink 100 extenders can be mounted to a wall or a furniture surface, if needed. See the 

eLink 100 User Guide

 (available 

online at 

www.extron.com

) for mounting instructions.

Cabling

Transmitter Connections

A

 

HDMI In connector

 — Connect an HDMI 

cable between this port and the HDMI 
output port of the video source device.

B

  IR Out connector

 — (Optional) Connect 

the tip-ring-sleeve end of the provided 
IR emitter to this IR Out connector. Use 
the included adhesive tape to attach the 
head of the IR emitter directly over the IR 
receiver window of the source device.
IR remote signals are passed from the receiver to the IR Out connector on the transmitter. This allows the user to point the 
remote toward the receiver (by the display) instead of the source device, should the source device be in a different location.

C

 

Power input connector

 — Plug the external 5 VDC power supply into this 5 V jack to power the transmitter.

NOTES:

 

• 

Each eLink 100 power supply kit contains a set of four plugs for use in different outlet types. See the 

eLink 100 

User Guide

 for instructions on replacing the plug, if needed.

• 

The USB mini-B port to the right of this connector is reserved for use by Extron service personnel.

Receiver Connections

A

 

IR sensor

 — Receives IR commands 

from the included IR remote control 
unit and the IR remote of the source 
device.

B

 

USB Power connector

 — Connect 

the USB end of the provided 5 V  
jack-to-USB adapter to this USB 
mini-B connector (see image below). 
Connect the other end of the adapter to the provided 5 VDC power supply.

To Power Supply

To USB Power 
Connector on 
Receiver

DC Connector 

on Power Supply

POWER

5V

1.5A MAX

HDMI

HDMI OUT

B

B

Back Panel

HDMI IN

IR OUT

POWER

SERVICE

5V

1.5A MAX

Отзывы: