Extron electronics DXP 1616 HD 4K, Руководство пользователя, Страница: 26 / 116

DXP HD 4K Series • Operation 18
NOTE:
Although the DXP 44 and 84 both have eight input and eight output buttons, not
all these buttons are functional for making ties:
• DXP 44 — Only input and output buttons 1 through 4 are functional, except for
creating and recalling presets (see Saving and Recalling Presets on page 37).
• DXP 84 — All input buttons are enabled, but only output buttons 1 through 4 are
functional, except for creating and recalling presets.
DXP HD 4K SERIES
DIGITAL CROSSPOINT MATRIX SWITCHER
C O N T R O L I/O
CONFIG 1 2 3 4 5 6 7 8
O U T P U T S
AUDIO VIDEO
ESC VIEW
PRESET ENTER
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
9 10 11 12 13 14 15 16
I N P U T S
B B
A A
C C
D D E E
A
Config port
D
Control buttons
B
Input buttons
E
I/O buttons
C
Output buttons
Figure 14. DXP HD 4K 1616 Front Panel
Figure 14 shows a DXP 1616 HD 4K front panel. The DXP 168 front panel is identical to this
one.
NOTE: Although the DXP 168 has 16 input and output buttons, output buttons 9
through 16 are not functional for making ties. They can, however, be used for creating
and recalling presets (see
Saving and Recalling Presets on page 37).
A
Config port — This USB mini-B port serves a similar communications function to
the rear panel Remote port, but is easier to access than the rear port after the matrix
switcher has been installed and cabled. Use a USB type A to mini-B cable to connect
this port to a USB connector on the computer to enable SIS commands to be sent from
the computer, connection to the PCS configuration software, and uploading firmware.
For more information about this port, see
Connecting to the USB Config Port
on
page 12.
NOTE: A front panel Config port connection and a rear panel Remote port
connection can both be active at the same time. If commands are sent
simultaneously to both ports, the command that reaches the DXP first is handled
first.
B
Input buttons — The input buttons have the following functions:
Primary:
•
Select an input.
•
Identify the selected input.
Secondary:
•
Save and recall presets (see Saving and Recalling Presets ).
•
Inputs 1 and 2 only — Toggle button background illumination on and off (see
Setting the Button Background Illumination — DXP 1616 Series Only on
page 53).