Extron electronics DVS 605, Руководство пользователя, Страница: 50 / 133

DVS 605 • SIS Communication and Control 42
SIS Command and Response Table
Command ASCII Command
(host to scaler
)
Response
(scaler to host
)
Additional Description
Input selection
Video and audio
X! !
In
X! •
All
]
Select video and audio from input
X!
.
Video
X!
& In
X! •
RGB
]
Select video from input source
X!
.
Audio X!
$ In
X! •
Aud
]
Select audio from input source
X!
.
View video input
&
X!] View current video input X!
.
View audio input
$
X!]
View current audio input
X!
.
View current input !
X!] View selected input X! (video only).
NOTES: See Video only and audio only switching (breakaway) rules on page 97 for details
•
Audio breakaway ($) is not allowed TO an input configured for any digital audio format.
•
Video breakaway (&) is not allowed FROM an input configured for any digital audio format.
•
Attempting either of these invalid modes gives an E17 error.
•
Audio breakaway is always allowed back TO the current video input.
•
When in PIP mode, audio breakaway is not supported. Audio follows either the main window or the PIP window, and is
selectable via SIS command.
KEY: X! = Input number: 1 through 5
Picture in Picture
NOTE:
•
HDMI input 5 cannot be used for PIP.
•
True seamless switching is not available with PIP mode enabled (see Picture-in-Picture (PIP) Mode on page 29 for
further details).
PIP on or off
PIP on
EX2&
PIP
}
Pip
X2&]
Turn on PIP and display input
X2&
.
X2&
is a
2 digit response.
PIP off E
0 PIP
}
Pip 00
] Turn PIP off.
View PIP selection
E
PIP
}
X2&]
View PIP selection
( X2&
is a 2 digit response, for
example,
01
).
KEY:
X2& = PIP window input selection: 0 to 4 ( 0 = off)
Swap main or PIP windows
Swap
% Tke
]
Swap between main and PIP window .
Input video format
Set video format
X!
*
X#
\ Typ
X!
*
X#] Set input X! to format X#
.
View set format
X!
\
X#] View set video format of input X!
.
View detected format
X!
*\
Verbose mode 2/3 response
X#]
Typ
X!
*
X#]
View actual video format auto-detected on input
X!
.
KEY: X!
= Input number:
1
through
5
X#
= Input video format:
0
= No signal detected,
1
= RGB, 2 = YUV auto,
3
= RGBcvS,
4
= S-video,
5
= Composite,
6 = DVI/HDMI (only available for inputs 3, 4, and 5), 7 = Auto detect (default for inputs 1 and 2)