Extron electronics DVS 605, Руководство пользователя, Страница: 105 / 133

Auto-Image button
Click this button (see image on the right,
1
) to start a one time Auto-Image on the
currently selected input.
AV input buttons (inputs 1-5)
Click these buttons (
2
) to select an input as desired. As a new
one is selected, the summary text within the panel changes to reflect
the new input and output status.
Breakaway Audio checkbox (audio models only)
Select this checkbox (
3
) to enable audio breakaway. The input
buttons separate into two columns:
Video
(
4
) and
Audio
(
5
).
From the
Video
column, click the input button associated with the
video to be used.
From the
Audio column, click the input button associated with
the audio to be used.
NOTE: When in PIP mode, audio breakaway is not supported. Audio follows either
the main window or the PIP window (as set on the Devices Settings page).
Video only and audio only switching (breakaway) rules
When the current audio input is configured for digital audio:
• Digital audio is not available from any input other than the currently selected video
input.
•
Audio-only switching can be made to inputs that are configured for analog audio.
• Video-only switching is not possible.
• Video-only switching can only be made after an audio-only switch to an input
configured for analog audio, and then can be made to any input.
When the current audio input is configured for analog audio:
• Audio-only switching is available to any input that has audio configured as analog.
• Audio-only switching is not possible to any input that has audio configured as digital.
• Video-only switching is possible, regardless of the audio configuration of the new
input.
• When switching video-only from an input that has audio
configured as analog, to an input where the audio is configured
as digital, the digital audio on the new input can now be selected.
Clear the Breakaway Audio checkbox to disable the audio breakaway.
Video and audio mute buttons
Click Video Mute (
1
) to mute only the video. The button turns blue.
Click Audio Mute (
2
) to mute only the audio. The button turns red.
Click AV Mute (
3
) to mute both video and audio simultaneously.
The button turns red and the Video and Audio mute buttons are
also activated.
To unmute any signal, click the appropriate button. The button
reverts to the default color, indicating the signal has been unmuted.
Freeze button
Click Freeze (
4
) to freeze the current video image. The button is blue
when image is frozen. Click it again to unfreeze the image. The buttons
reverts to the default color.
1 2
3
4
1
2
3
4 5
DVS 605 • Using the Default Web Pages 97