Extron electronics DVS 605, Руководство пользователя, Страница: 116 / 133

PIP picture controls
These PIP input settings include brightness, contrast, color, tint, and detail.
NOTES:
•
Picture controls are not applied if there is no input signal. Any changes made
while there is no input signal are lost when a signal is detected.
• After PIP is disabled, the configured PIP picture settings still apply to the specified
input.
To adjust PIP picture settings (brightness, contrast, color, tint, or detail), click and drag
the associated slider to the desired value (see figure 81 ,
5
on the previous page).
Alternatively, you can enter a value in the field associated with the picture setting, or click
the
up and down arrows.
Size and position
In this panel (
6
), the size and position of the PIP windows and content, and the main
windows and content can be adjusted. The settings can be saved in a PIP preset.
NOTE:
Size and position settings of the PIP window, PIP content, main window, and
main content are disabled if you are configuring the DVS 605 offline.
The position and size of the content or window can be adjusted using the values in the
Horizontal Position , Horizontal Size , Vertical Position , and Vertical
Size fields (
7
).
To adjust the position and size numerically:
1. In the
Size and Position
panel, click the button for the window ( Main Window or
PIP Window ) or content ( Main Content or PIP Content ) that is to be adjusted.
2. Adjust the size by entering a value or clicking the up and down arrows in the
Horizontal Size and Vertical Size fields.
3. Adjust the position by entering a value or clicking the up and down arrows in the
Horizontal Pos and Vertical Pos fields.
NOTE: In steps 2 or 3, if a value above or below the accepted range is entered, a
red border is displayed and a pop-up window indicates the accepted minimum
or maximum value.
DVS 605 • Using the Default Web Pages 108