Extron electronics DVS 605, Руководство пользователя, Страница: 115 / 133

PIP Settings Page
In PIP mode, the DVS 605 can display two images on the screen simultaneously. From
this page, the PIP settings can be adjusted. This includes input selection, swapping
between the main and PIP inputs, adjustment of the picture control settings, main and PIP
window position and sizing, and the saving and recalling of PIP presets.
NOTES: When the DVS 605 is in PIP mode:
• Audio breakaway is not supported. Audio follows either the main window or the
PIP window (set on the
Device Settings
page).
•
True seamless switching is not available (see Picture-in-Picture (PIP) Mode on
page 29
Click this button to open the PIP Settings page.
1
2
3
4
5
6
7
8
9
10
11 12
Figure 81. PIP Settings Page
PIP input selection
Inputs 1 through 4 can be selected as a PIP input. Click the button of an available input
(see figure 81,
1
). The content of this input displays in the PIP window.
NOTES:
• The currently selected AV input is disabled in the list of available PIP inputs as the
main input and PIP input cannot be the same.
• I
nput 5 cannot be selected as an input for PIP mode.
• The PIP Off and Swap buttons are disabled if PIP mode is not enabled.
To turn off the PIP feature, click the PIP Off button (
2
).
To swap the active main window with the current PIP input, click the Swap button (
3
).
Snap PIP to < location >
To snap (align) the PIP window to a specific corner of the main window, click Top Left ,
Top Right , Bottom Left , or Bottom Right within the
Snap PIP
panel (
4
)
to
display
grid. This places the PIP window in the specified corner of the main window. When using
the
Snap To
feature, the PIP window is always 25 pixels away from the edges of the
output raster.
81
DVS 605 • Using the Default Web Pages 107