Extron electronics DVS 605, Руководство пользователя, Страница: 111 / 133

Assigning EDIDs
To assign EDID to selected inputs:
1.
From the
Inputs
screen (table of inputs) on the right, select the desired input or
inputs (see figure 78,
1
).
2. From the Favorites , Connected Outputs , or Available EDIDs panels, select an
available EDID (
2
represented by a blue, green, or yellow output display icon).
3. Click the Assign button (
3
) to assign EDID to the selected input or inputs.
1
2
3
4
5
Figure 78. Assigning EDIDs
NOTE: If you do not assign any inputs but still click
Assign , an error message is displayed.
To assign EDID to all inputs:
1.
From the
Favorites
,
Connected Outputs
, or
Available EDIDs
panels, select an
available EDID (
2
represented by a blue, green, or yellow output display icon).
2. Click the Assign to All button (
3
).
NOTE:
If you select Assign to All , all input boxes, checked or unchecked, are
ignored and the EDID is assigned to all inputs.
To match the selected inputs to the current output resolution:
1. From the Inputs table on the right, select the desired input or inputs (see figure 78,
1
).
2. In the
Output Resolution
panel (
4
upper right of screen), click Match
Output (
5
).
EDID can be filtered or saved (see the PCS EDID Minder Page on page 80 for details).
78
DVS 605 • Using the Default Web Pages 103