$6#3$s/PERATION
10
Powering On
!PPLYPOWERBYCONNECTINGTHEPROVIDED)%#POWERCORDTOTHEREARPANELPOWERCONNECTOR
ONTHE$6##ONNECTTHE$6#TOAN!#POWERSOURCE
NOTE:
Audio and video mute settings are
not
retained when power is cycled to the
$6#
Default Cycle
7HENPOWERISAPPLIEDTHE,#$SCREENDISPLAYSTHE%XTRON3
3
logo. After approximately
10 seconds,
EXTRON
DVC
501
SD
is displayed. The unit part number and current firmware
version are displayed after approximately another 5 seconds. After those screens, the default
cycle begins, in which the LCD screen alternates every 5 seconds between the input signal
type and data rate, and the output resolution and refresh rate. The default cycle continues
while the menu system is not in use.
The flow diagram below shows the order in which the screens appear at power-up and
during the default cycle.
60-1033-01
F/W V1.00
5 sec.
5 sec.
EXTRON
DVC 501 SD
5 sec.
5 sec.
Power
On
10 sec.
INPUT
HDSDI 1.485G
INPUT
720p @59.94Hz
Figure 10.
Power-up and Normal Default Cycle Example
Default Cycle — Special Conditions
The default cycle changes when any of the following conditions exist:
s
No input connected
— A single screen is displayed, indicating that there is no input
signal.
INPUT
NO SIGNAL!
Figure 11.
Default Screen When No Input Is Connected