Extron electronics DTP2 T 202 FB, Руководство пользователя

Страница: 11 / 40

DTP2 T 202 FB • Introduction 3
Features
•
Transmits HDMI or DisplayPort video, control, and analog audio up to 330
feet (100 meters) over a single STP cable
— The unit provides high reliability and
maximum performance on an economical and easily installed cable infrastructure.
•
HDBaseT compatible — The DTP2 output can be configured to send video and
embedded audio, plus bidirectional RS-232 and IR signals to an HDBaseT-enabled
display.
• Supports computer video to 2560x1600 @ 60 Hz or UHD (3840x2160) @ 60 Hz.
• Analog stereo audio embedding — Analog stereo audio signals can be selectively
embedded onto the digital video output signal and transported over the TP cable. The
HDMI and DisplayPort inputs can be set to pass the embedded digital audio, embed
the analog audio, or to automatically embed the analog audio when no digital audio is
detected.
•
Accepts additional analog stereo audio signals
— The DTP2 transmitter supports
a direct pass through connection for stereo analog audio signals for simultaneous
transmission over the same single TP cable. Analog audio is embedded onto the digital
video signal. A DTP2 or legacy DTP receiver can output balanced and unbalanced
audio, allowing streamlined integration within an AV system.
•
Bidirectional RS-232 and IR insertion for AV device control — Control and IR
signals can be transmitted alongside the video signal over the TP cable, allowing the
remote device to be controlled without the need for additional cabling. Bidirectional
control insertion eliminates the need for control system wiring to remote devices.
• Remote powering of transmitter or receiver — For simplified installation, only one
power supply is necessary to power both devices.
• Digital conversion of analog input signals — Analog signals are digitized, ensuring
that a reliable, high quality digital video signal is sent to the output destination.
•
EDID Minder
— Automatically manages EDID communication between connected
devices, ensuring that all sources power up properly and reliably output content for
display.
•
Key Minder — Authenticates and maintains continuous HDCP encryption between
input and output devices, verifying HDCP compliance for quick, reliable switching in
professional AV environments.
• Compatible with all DTP2 and legacy DTP receivers — The switching transmitters
can be used with the Extron IN1608, DTP CrossPoint 84, and other DTP-enabled
products to meet application requirements.