Extron electronics DTP2 T 201 D, Руководство пользователя

Страница: 32 / 35

DTP2 T 201 D Transmitter • Remote Configuration and Control 24
On the
Add Device...
window, the path to the new firmware file is displayed in the
Path field (see figure 23,
1
).
DTP2 T 201 D
DTP2 T 201 D
1
2
DTP2T201D\dtp2t201d_A_v1.00_081518.S19
3
Figure 23. Path to New Firmware File on the Add Device Window
10. If this is the only device uploading firmware , click Add (
2
). The device name is
added to the Device section of the Firmware Loader window and the Add Device
window closes.
If firmware is uploading to multiple devices , do the following:
a. Click Add Next (
3
). The first device is added to the
Device
section of the
Firmware Loader
window, and the
Add Device..
. window remains open.
b. For each additional device that needs to be added to the Firmware Loader
window, repeat steps 4 through 9, then click Add Next (
3
).
c. For the last device, click Add (
2
), instead of Add Next (
3
), to add the device and
close the Add Device... window.
DTP2 T 201 D dtp2t201d_A_v1.00.00... 60-1741-53 Extron USB Devi... Connected 1.00.001
1 1 1
2 2 2
Lorem ipsum
Figure 24. Firmware Loader Screen with a DTP2 T 201 D Added
11. To remove a device from the
Device
section, do the following:
a. Click on the names of the devices to be deleted, highlight them (see figure 24,
1
).
b.
Click on the Edit tab (see
figure 25
,
1
, on the next page) in the menu bar.
23
24