Extron electronics Basic MediaLink Controllers MLC 52 RS Скачать руководство пользователя страница 2

Introduction 

M L C   5 2

Extron 

MLC 52 RS MK 

and

 MLC 52 RS VC MK

 

MediaLink  Controllers  are  economical  control 
panels  ideally  suited  for  conference  room  or 
classroom  A/V  systems.  Each  model  fits  in  a 
standard  MK  wall  or  junction  box  and  offers 
IR control and unidirectional RS-232 control. The 
MLC  52  RS  VC  MK  adds  an  integrated  volume 
control knob for use with any Extron power amplifier 
or preamplifier with a remote volume control port. 
By  providing  easy  input  selection,  power,  and 
volume control, these controllers make classroom 
A/V operations simple. Both models are available in 
a white or brushed aluminum finish to complement 
a wide range of environments.

Consistent A/V Control in Every Room

Each  MLC  52  controller  acts  as  an  extended 
remote  control  panel,  providing  user-friendly 
control  for  a  display’s  power,  volume,  and 
input selection. Because the MLC 52 offers a 
central  point  of  control  for  a  display  device’s 
key  functions,  it  eliminates  the  need  for  the 
display’s  handheld  IR  remote  control,  making 
operations  much  more  efficient.  With  the     
MLC  52,  there  are  no  misplaced  remotes  to 
search  for,  no  confusing  menus  to  navigate 
through, and no dead batteries to replace. 

No  matter  what  brand  of  display  is  installed 
in  each  presentation  venue,  the  MLC  52 
MediaLink  Controllers  always  provide  a 
consistent control method from room to room. 
Presenters  with  little  or  no  training  can  walk 
into  any  MediaLink  equipped  classroom  and 
operate the A/V system with ease.

Confi gurable Buttons for Flexible 

Control Options

The MLC 52 MediaLink Controllers are easy to 
confi gure and no programming is required to 
make them work. Each MLC 52 has six buttons 
that  can  be  confi gured  to  control  almost  any 
function of the projector, such as selecting an 
input, controlling the volume, muting the picture 
or  switching  it  on  and  off.  Using  the  intuitive 
setup  software  provided,  these  buttons  can 
be  confi gured  to  send  out  any  IR  or  RS-232 
command supported by the projector, making 
it easy to customize the controller to meet the 
needs of single-display A/V systems. 

Each  button  can  store  up  to  four  separate 
commands,  providing  additional  fl exibility  to 
meet the specifi c control requirements for most 
display  devices. When  a  button  is  confi gured 
for Macro mode, all of the stored commands 
associated  with  that  button  can  be  sent  with 
the press of a single button. In Toggle mode, 
the button steps through a series of two, three, 
or four commands, issuing a single command 
with each press of the button.

Free Projector Drivers

Extron creates and administers a wide selection 
of  commonly  used  projector  control  drivers. 
These  IR  and  serial  RS-232  drivers  allow 
MediaLink  Controllers  to  communicate  with 
a  display  device.  They  enable  control  of  basic 
projector functions such as power, input selection, 
and  volume  adjustment.  Go  to  the  Extron Web 
site at www.extron.com to download drivers for 
the latest and most popular projectors.

Three Easy Ways to Confi gure

The  MLC  52  enables  integrators  to  choose 
any  of  three  methods  when  configuring  the 
controllers.  When  used  with  the  supplied 
Windows

®

-based  configuration  software, 

installation  files  can  be  saved  and  used  to 
duplicate additional MLC 52 models. The files 
can also be archived for later use. 

Simple configuration wizard

• 

 - Experience 

fast and simple setup within minutes using the 
front panel configuration port, supplied software, 
and the PC’s RS-232 port. Quickly allocate 
a function to a button just by dragging the 
command to the desired button. 

IR learning

• 

 - Set up the MLC 52 directly by 

beaming commands from the IR remote to the 
MLC 52, without the need for software and a PC. 

IR beaming

• 

 - Setting up multiple controllers 

with the same configuration is made easy 
with IR beaming. Simply beam the complete 
configuration from one MLC 52 controller to 
another controller, without using any cable or 
software.

Convenient MK size 

The  MLC  52  RS  MK  Series  controllers  
were  designed  to  fit  the  standard  1-gang 
(MLC 52 RS MK) or 2-gang (MLC 52 RS VC MK) 
MK  Electric  size  boxes.  This  gives  maximum 
flexibility to the installer to mount the controller 
in either MK size junction boxes, surface mount 
boxes, or cable channels. 

MLC 52 RS MK
MediaLink Controller

Содержание Basic MediaLink Controllers MLC 52 RS

Страница 1: ...onfigure IR learning preconfigured display drivers and IR beaming Inactivity timer for display shutoff Front panel security lockout Designed to mount in a 47 mm deep MK junction box for UK Singapore Hong Kong and other markets that use MK type junction boxes Available with white or brushed aluminum faceplate MediaLink Controllers for MK Junction Boxes MLC 52 RS MK MLC 52 RS VC MK Simply take contr...

Страница 2: ...omize the controller to meet the needs of single display A V systems Each button can store up to four separate commands providing additional flexibility to meet the specific control requirements for most display devices When a button is configured for Macro mode all of the stored commands associated with that button can be sent with the press of a single button In Toggle mode the button steps throu...

Страница 3: ...front panel Multiple Memories Each button can store up to four IR or serial RS 232 commands Backlit Buttons Illuminated buttons can be custom labeled with supplied label insert sheets for easy identification These buttons are helpful for presenters in low light environments MK Standard Size MLC 52 RS MK Series controllers fit conveniently in standard MK size junction boxes Built In IR Emitter Rece...

Страница 4: ...TE VOLUME VC MODELS ONLY Volume control port 1 3 5 mm direct insertion captive screw connector 3 pole Pin configuration 1 10 VDC 50 mA max 2 volume variable voltage 3 GND Volume control voltage range 0 V mute to 10 V maximum volume GENERAL External power supply 100 VAC to 240 VAC 50 60 Hz external to 12 VDC 2 A regulated Power input requirements 12 VDC 0 15 A Mounting MLC 52 RS MK MLC 52 RS VC MK ...

Отзывы: