Extron electronics AXP 64 C AT страница 22 Скачать руководство пользователя

Страница: 22 / 53

AXP 64 C AT • Installation

Downloading DSP Configurator and Software

Visit

www.extron.com

to download and install the DSP software.

NOTES:

•

Download the latest versions of software for your product.

•

An Extron Insider account is required to download and use the software.

Mouse over the

Download

tab (see figure 11,

) at the top of the page.

Figure 11.

Software Links on Download Screen

Click the appropriate link on the drop-down list. The

Download Center

page opens.

For software

, either click the

Software

link (

) or, if the software is listed, click

directly on that link (see the

DSP

Configurator

Software

link

) and skip to step 5.

NOTE:

If there is no direct link to your software, click the

Software

link (

Scroll down to the alphabetic navigation bar (see figure 12).

Figure 12.

Alphabetic Navigation Bar

Click the appropriate letter to locate the software (

for DSP Configurator).

Click

Download

(see figure 13). The

Download Center

page of the selected software

or firmware opens and an executable (

.exe

) file is downloaded to the PC. Make a note

of the folder where the software or firmware file was saved.

NOTE:

(Optional) Click

Release

Notes

for more information about the software or

firmware update.

Figure 13.

DSP Configurator Software Download

Install the software.

Navigate to the folder where the software file was downloaded.

Double-click the executable file and follow the on-screen directions to install the
software.

step 5

Содержание AXP 64 C AT






















































Результаты поиска

Содержание AXP 64 C AT

Отзывы:

Похожие инструкции для AXP 64 C AT

Бренды по названию

Популярные бренды

Extron electronics AXP 64 C AT, Руководство пользователя

Результаты поиска

Содержание AXP 64 C AT

Отзывы:

Похожие инструкции для AXP 64 C AT

Бренды по названию

Популярные бренды