Extron electronics AXP 64 C AT страница 21 Скачать руководство пользователя

Страница: 21 / 53

AXP 64 C AT • Installation

Software Installation

To configure and operate the AXP, use a PC running Microsoft

Windows 10 or newer

and

the following software programs:

•

Dante Controller

for Windows from Audinate is required to select and route

AXP 64 C AT digital inputs and outputs to and from all connected Dante-compatible
devices on the same network and to rename connected devices.

•

DSP Configurator

is used to customize signal processing for the input channels of the

AXP 64 C AT.

To assist identification of multiple connected AXP 64 C ATs on the network, rename each
device using Dante Controller (see

Renaming the AXP 64 C AT in Dante Controller

page 25). After the AXP is renamed, connect to DSP Configurator to configure it (see

Connecting to DSP Configurator

on page 16).

Both DSP Configurator and Dante Controller are available from the AXP 64 C AT product
page on the

Extron Website

. Digital signal routing must be done using Dante Controller

from Audinate.
See

Rear Panel Features and Cabling

on page 7 , and

Connecting the

AXP 64 C AT to a Network

on page 11 for additional details to connect via the LAN

ports.

Software Installation Overview

Both DSP Configurator and Dante Controller must be installed to configure the AXP 64 C AT
and route transmit and receive channels. Download and install both software programs

the order they are listed below:
Download Dante Controller

for Windows from

www.extron.com

(see

Downloading

and Installing Dante Controller

on page 23).

Install Dante Controller

Rename each AXP C AT

as it is placed on the network (when there are multiple

AXP 64 C ATs on the network) (see

Renaming the AXP 64 C AT in Dante Controller

on page 25).

NOTES:

•

To avoid confusion, rename each device with a unique identifier.

•

To simplify renaming, connect only one device to the network at a time. As
each device is renamed, it can remain on the network.

Download DSP Configurator

(see

Downloading DSP Configurator and Software

on page 14).

Install DSP Configurator

(see

Connecting to DSP Configurator

on page 16).

Содержание AXP 64 C AT






















































Результаты поиска

Содержание AXP 64 C AT

Отзывы:

Похожие инструкции для AXP 64 C AT

Бренды по названию

Популярные бренды

Extron electronics AXP 64 C AT, Руководство пользователя

Результаты поиска

Содержание AXP 64 C AT

Отзывы:

Похожие инструкции для AXP 64 C AT

Бренды по названию

Популярные бренды