16
English
WARNINGS
General
• Do not use any sharp tools to open the
packaging.
• We strongly advise against using power tools.
• Tripping hazard, mind your step.
• Do not put out cigarettes on the table.
• Not grafitti proof.
• Do not leave children unattended whilst playing
on the table.
• Colors can differ over years and from batch to
batch.
Product
• Do not drag the table, but carry it a with minimum
of 2 people.
• Do not sit or stand on the table.
• Always place the table on an even surface.
• Make sure the legs are always fully open.
Powder coating
• White powder coating requires more
maintenance.
• Do not use abrasive scouring powders or
scourers as they will scratch the surface.
• Color can fade to some extent when exposed to UV.
• Flame retarding - NEN-EN13501-1 A2-sl -
Satisfying the same criteria as Class B for the
SBI-test according to EN13823. In addition,
under conditions of a fully developed fire these
products will nog significantly contribute to the
fire load and fire growth.
• Dark colors can get very hot in sunny weather.
ASSEMBLY INSTRUCTIONS
Tiki table 3-people - p8
1. Unfold the legs until you can’t open them any
further.
2. Slide the tabletop over two caps.
3. Now pull the third cap backwards to easily fit the
tabletop. Release the cap once the tabletop is in
position so that the tabletop is fixed.
Tiki table 5-people - p10
1. Unfold the legs until you can’t open them any
further.
2. Slide the tabletop over three caps.
3. Now pull the fourth & fifth cap backwards to
easily fit the tabletop. Release the cap once the
tabletop is in position so that the tabletop is fixed.
With Acacia - p12
1. Slide the center hole of the Tiki table over the
Acacia parasol base. Attention: It is only possible
to use the Acacia lightweight parasol base.
2. Unfold the legs until you can’t open them any
further.
3. Slide the tabletop over two caps and pull the
third cap backwards to easily fit the tabletop.
Release the cap once the tabletop is in position
so that the tabletop is fixed. Also put the parasol
ring in the parasol hole of the tabletop to prevent
scratching.
4. Now insert the central tube (with crown) through
the tabletop hole over the galvanized steel foot
and fix the height adjustment knob in the highest
hole. (Now follow the steps in the Acacia manual
to assemble the Acacia.
5. We advise you to put the Acacia in the highest
position when used with the Tiki table.
MAINTENANCE
Powder coating
CLEANING
Regularly
Use Extremis Multicleaner, a 100% biodegradable
detergent or common kitchen cleaning products.
Avoid using aggressive products. These surfaces are
best cleaned with a neutral cleaning product diluted
in water.
REMOVING STAINS
Only if nothing else helps
The magic eraser gets rid of most stubborn stains
without effort. Only if stubborn stains remain visible
after treatment according to the instructions, you
can use the Extremis Magic Eraser sponge. This
sponge is made of melamine resin and wears away
with use. The sponge is very easy to use and gives
results up to 26 times faster than a traditional mi-
crofibre cloth. The magic sponge is the solution for
getting rid of stubborn stains such as felt-tip pens,
grease, scuff marks, limescale marks or coffee and
tea stains. The magic sponge can be used on tar-
paulin fabric, plastic profiles, glass, steel, chrome,
aluminium, porcelain, artificial leather and many
types of floor.
Warnings – Assembly text instructions – Maintenance
Содержание Tiki High
