ExtremeView Magnum XV 3300, Руководство пользователя

Страница: 16 / 50

Menu Guide
Select Language With “
◀
”, “
▶
” Key On The RCU, Then Press Ok Or Menu Key To
Continue.
◈
Initial Service Searching
Installation
Menu Language
Factory Satellite Restore
At the booting, select area with “
◀
”,
“
▶
” key on the RCU. this moment, PIG
on the right side of the screen
shows the receive-able range.
After selecting the area, move to a
certain satellite with “
▲
”, “
▼
” button
on the RCU, there will be range and
signal strength in the PIG.
If the users wants to find satellites
easily, press the “Yellow” or “Green” button
to sort by name and longitude.
Then, Press OK key on the RCU to edit
satellite connection and it will move
to setting mode.
Selected Satellite Edit
1) Motorized System
Select motor system. (OFF, v1.2 or USALS
system) (reference page 17)
2) LNB Type
Depending on the type of LNB cling to your
antenna, you can supply either LNB by setting
“single” , “universal” or “DishPro”.
3) Local Freq.
Users can input local frequency directly with numeric keys on the
RCU. (0….9, one cable1/2 , 5150, 9750, 10600, 10750mhz). to move the cursor,
press cursor “
◀
”, “
▶
” keys on the RCU.
4) DiSEqC
To the supported the DiSEqC 1.0 /1.1. you can selected the dish to the connection.
* Finally press OK to save settings.
16