The Local Extender
The Local Extender connects to the computer using a standard USB 3.2 Gen 1 cable. Power is provided by the USB
Host/Hub or optional DC input.
ITEM TYPE
DESCRIPTION
1
DC Power Port
Optional DC power input, accepts 5V 3A. (Sold separately)
5V 3A Power Supply (LVL VI) 1.7mm ID (Ref PN 21-00111)
2
Power LED
*
Refer to note below
LED Is SOLID GREEN When sufficient power is provided by host. LED is SOLID
AMBER when less than optimal power is not guaranteed by host.
3
Link LED
LED is SOLID GREEN ON when Local Extender is linked to an opposite Remote
Extender. LED is OFF or BLINKING when there is no connection between the Local
Extender and Remote Extender units.
4
USB Host Port
USB 3 Type-C receptacle used to connect Local Extender to USB 3 Host computer.
5
Link Port (ARJ45)
Accepts custom ARJ45 Cable included with product.
6
Mode
Reserved for manufacturer use.
7
Config
Reserved for manufacturer use.
*
Guaranteed sufficient power via USB Bus power requires a USB-C connection to a USB-C power upstream capable of 5V
3A configuration. When using a USB-A to USB-C or similar legacy connection, LED will be AMBER. It is recommended in
situations where the LED is AMBER that sufficient testing be performed to guarantee system stability.
5
Front View
Rear View
Link
Host
5V DC
1
2
3
4
5
6
7
Link
Config
Mode
note
