Extreme Networks SSA S180 Class, Руководство по установке оборудования

Страница: 70 / 84

Use sizes that support a #10 screw minimum.
Typical drill size is 5/16 inch for the #10 conical lead anchor for concrete.
Typical drill size is ¼ inch for the #10 flanged polypropylene anchor for concrete.
Follow the manufacturer’s instructions, including the recommendation for drill depth for the insert that
you are using.
Mounting the SSA Chassis on a Wall
After preparing the wall, follow these steps to mount the SSA chassis:
1 Using four customer-supplied screws and wall anchors, secure the mounting bracket to the wall. See
Figure 35 .
The screws and wall anchors that you provide must be capable of supporting at least four times the
combined weight of the SSA chassis and two power supplies.
You must secure the mounting bracket to the wall in the orientation shown in Figure 35 .
Figure 35: Securing the Wall Mounting Bracket to a Wall
Installing the SSA-WALL-MOUNT Kit
S-Series Stand Alone (SSA) Switch Hardware Installation Guide 70