Extreme Networks SSA S180 Class, Руководство по установке оборудования

Страница: 54 / 84

Table 23: Contents of SSA-FB-MOUNTKIT (continued)
Item Quantity
10-32 pan head screws (black) 2
10-32 cage nuts 2
Note
The SSA-FB-MOUNTKIT mounting kit
does not include rack screws. You must provide screws
or fasteners appropriate to your rack for securing the rails and the SSA chassis in the
equipment rack. Each procedure in this guide specifies the number of rack screws that you
must provide.
Removing the Rack Mount Ears from the SSA Switch
Remove the rack mount ears from both sides of the SSA switch before continuing with the mounting kit
installation. See
Figure 22 .
Figure 22: Removing the Rack Mount Ears
1 = Rack mount ear 2 = Rack mount ear screws
The removed rack mount ears and screws are not used in any mounting kit installation procedures.
Installing the Adapter Plates
Two adapter plates come with the mounting kit. Adapter plates are used to secure the chassis to:
•
The rail and extension assemblies used in the four-post rack configuration (see Four-Post Rack
Mount Installation on page 56).
Optional Rack Mount Rail Kit Installation
S-Series Stand Alone (SSA) Switch Hardware Installation Guide 54