120480-00 Rev. 01
© 2009 Extreme Networks, Inc. All Rights Reserved
1
ReachNXT
™
100-8t Quick Start Guide
This guide describes how to install the ReachNXT
™
100-8t port extender and configure the uplinked
ExtremeXOS switch to detect and initialize the port extender.
Safety Information
Only trained service personnel should perform service to Extreme Networks switches and their
components. Trained service personnel have read all related installation manuals, have the technical
training and experience necessary to be aware of the hazards to which they are exposed in performing a
task, and are aware of measures to minimize the danger to themselves or other persons.
Before installing a ReachNXT 100-8t port extender into your network:
●
Read the latest installation and safety information provided in the
ReachNXT 100-8t User Guide
.
●
See Appendix A of the
ReachNXT 100-8t User Guide
for additional information regarding regulatory
compliance certifications.
NOTE
Die deutsche Version der für dieses Produkt von Extreme Networks relevanten Sicherheitshinweise finden sich im
Abschnitt “Sicherheitshinweise” im
ReachNXT 100-8t User Guide
. Dieses Installationshandbuch steht auf der
folgenden Webseite zum Download zur Verfügung:
http://www.extremenetworks.com/services/hardware-userguide.aspx.
Getting Documentation
You can download the
ReachNXT 100-8t User Guide
and other Extreme Networks product
documentation from:
http://www.extremenetworks.com/services/documentation.aspx
Requirements
Before you begin, make sure you have the following:
●
ReachNXT 100-8t ExtremeXOS port extender
●
ExtremeXOS switch to serve as the uplinked switch. The uplinked ExtremeXOS switch must be
running ExtremeXOS version 11.2 or higher.
●
Cable to connect the ReachNXT 100-8t to the uplinked ExtremeXOS switch
Depending on your installation, you may also have the following:
●
Optional SFP module, if one will be used as the connector to the uplinked ExtremeXOS switch
●
Optional magnet mounting kit, if you will mount the ReachNXT 100-8t in a fixed location
