Extreme Networks ExtremeWireless AP560h, Руководство по установке, Страница: 13 / 40

Install the Access Point
Verify the AP560h Box Contents on page 13
Access Point Bracket Usage and Mounting Options on page 14
Install the Access Point on a Wall on page 15
Install the Access Point on a Pole on page 22
About This Task
The access point is installed on a flat surface such as a wall and to a pole using brackets and accessories.
Refer to the
purchase order information to know more about picking the right access point bundle for
your installation needs.
Note
The access point cannot be installed directly on a wall or to a pole without the mounting
bracket.
When you receive the access point bundle, perform a visual inspection of the access point, the bracket,
and the accessories for any physical damage.
Contact Extreme Networks Support in case of any damage.
Before installing the access point:
Procedure
1. Verify the box contents .
2. Review the safety guidelines .
Verify the AP560h Box Contents
About This Task
The box contains the access point and a removable label for your documentation. There is another label
that mentions the minimum base firmware version that the product needs to have.
The box contents of the access point and the access point bundle are listed below:
ExtremeWireless™ AP560h Access Point 13