manualshive.com logo in svg

Extreme Networks ExtremeWireless AP410e, Руководство по установке, Страница: 26 / 45

Поделиться
Скачать
Extreme Networks ExtremeWireless AP410e Скачать руководство пользователя страница 26

5. Squeeze the bracket parts together until you hear the T-bar locking tab click into place.
6. Slide the bracket base into the rear groove of the access point.
7. Hold and rock the access point back and forth to ensure that it is securely mounted.
8. Attach the RJ45 connector to the GE1 port.
9. Replace the ceiling tile.

Install the Access Point on a Junction Box or Gang Box

About This Task

The main mounting bracket or the optional WALL04 (#30516) bracket is used for installing the access
point on a junction box or gang box. The main mounting bracket is used only when the mounting holes
on the bracket and the box align.

Note
The box models are limited to the USA box models when using the main mounting bracket for
installation.

If you are using the main mounting bracket to install the access point on a junction box:

Procedure

1. Remove the screws holding the box coverplate.
2. Remove the LAN cable from the coverplate.

Install the Access Point on a Junction Box or Gang Box

Install the Access Point

26

ExtremeWireless™ Access Points AP410i/e

Содержание ExtremeWireless AP410e














































Отзывы:

Нет отзывов