manualshive.com logo in svg

Extreme Networks ExtremeWireless AP4000, Руководство по установке, Страница: 16 / 33

Поделиться
Скачать
Extreme Networks ExtremeWireless AP4000 Скачать руководство пользователя страница 16

Procedure

1. Place the AH-ACC-BKT-AX-TB bracket on a wall or a solid surface, and mark and drill two mounting

holes.

Figure 4: AH-ACC-BKT-AX-TB bracket with wall mounting holes

Callout

Description

1

Metal angled cuts

2

Wall mount holes

3

White tab

2. Attach the bracket to the wall using two screws.

Use screw in anchors, if needed.

3. Attach the Ethernet port cap to the access point Ethernet port.
4. Align the red dot on the back of the access point against the red dot on the bracket.

Note
The bracket has a center circular tip that fits into the circular dip on the back of the access
point.

5. Press and rotate the access point 1/8th turn clockwise until it clicks into place on the bracket.
6. Attach the Cat6 RJ45 cable to the Eth0 or Eth1 port.
7. Place the cable cover over the Ethernet cable.

Install the Access Point on a Wall or a Solid Surface
Using the AH-ACC-BKT-AX-TB Bracket

Install the Access Point

16

ExtremeWireless™ Indoor Access Point AP4000

Содержание ExtremeWireless AP4000


































Отзывы:

Нет отзывов