A
Specifications
External Power Supplies
Internal Antenna APs
External Antennas
This appendix lists the specifications for the AP3935i and AP3935e access points and an external 12V
DC power supply.
Table 5: Specifications for the AP3935i and AP3935e
Item
Specification
31012
WS-AP3935i-FCC
31013
WS-AP3935i-ROW
31014
WS-AP3935e-FCC
31015
WS-AP3935e-ROW
Enclosure material
Metal base, plastic cap
Power source
PoE 802.3at for full performance; (802.3af for low
performance mode) DC power supply.
Power consumption
20W (Max.) 17.0W (Average)
Outside dimensions (max)
Length: 215 mm (8.46”)
Width: 215 mm (8.46”)
Thickness (not including mounting bracket):
AP3935i: 56 mm (2.2”)
AP3935e: 57 mm (2.23”)
Antenna (AP3935i only)
8 ports: 4 (Radio1) ports (5GHz antenna), 4 (Radio 2)
ports (2.4GHz antenna)
Uplink Interface
GbE Ethernet x1 with PoE
RoHS compliant
Yes
Radio Configuration
Dual Band Dual Concurrent 802.11ac and 802.11n
Radio 1 IEEE 802.11ac, 5GHz, 4x4:4 MU-MIMO, 20/40/
80MHz channel (up to 1733 Mbps per radio)
Radio 2 IEEE 802.11n, 2.4GHz, 4x4:4, MCS8, MCS9, 20/
40MHz channel (up to 800 Mbps per radio)
Operating temperature
32° F to 122° F (0° C to +50° C)
External Power Supplies
AP3935 APs may be powered by IEEE 802.3af compliant PoE cables connected to the Ethernet ports in
the connector bay. This is usually the preferred method of powering for users that plan to mount the
ExtremeWireless™ AP3935i & AP3935e Installation Guide
26