Extreme Networks ExtremeSwitching VDX 6740, Руководство по установке оборудования

Страница: 41 / 135

4. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg).
FIGURE 21 Positioning the device in the rack
1. Screws, 10-32 x 5/8-in., panhead Phillips 2. Retainer nuts, 10-32
Attaching the rear brackets to the extensions
Complete the following steps to attach the rear brackets to the extensions. There are short, medium, and long rear brackets that you can
use for this step. Choose the correct bracket for the depth of your rack.
1. Select the proper length rear bracket for your rack depth.
2. Slide the right rear bracket onto the right extension, as shown in
Figure 22 .
The short rear brackets are shown. Use the first and third vertical pairs of holes for the screws.
Refer to Figure 23 for the positioning of the medium or long brackets and screws.
3. Attach the brackets using four 6-32 x 1/4-in. panhead screws.
4. Repeat
Step 2 and Step 3 to attach the left rear bracket to the left extension.
Flush-front mounting the device in the rack
ExtremeSwitching VDX 6740 Hardware Installation Guide
9036108-00 41