Changing Engine Settings
21 of 31
When you see the following screen, configuration is complete.
==============================================================
==
Extreme Networks - Access Control Engine - Setup Complete
==============================================================
==
Setup of the Access Control is now complete. Details of the engine setup
process are located in the log files in the /var/log/install directory.
==============================================================
==
You are now ready to use Extreme Management Center to manage your engine.
If you have reinstalled your Extreme Access Control engine software, use
Extreme Management Center to enforce the engine. Enforcing writes your
Extreme Management Center configuration information to the engine.
Changing Engine Settings
This section provides instruction for changing your engine settings following
your initial engine configuration, should the need arise. Depending on the
settings you want to change, you can use either Extreme Management Center or
the engine CLI to make the changes.
Using Extreme Management Center
Use Extreme Management Center to easily change engine settings including
DNS, NTP, SSH, and SNMP configuration. You can also use Extreme
Management Center to change the engine hostname and default gateway, as
well as configure static routes for advanced routing configuration.
Changing DNS, NTP, SSH, and SNMP Settings
Use the Engine Settings window in Extreme Management Center to change the
following:
