manualshive.com logo in svg

Extreme Networks ExtremeCloud Appliance E1120, Руководство пользователя, Страница: 129 / 219

Поделиться
Скачать
Extreme Networks ExtremeCloud Appliance E1120 Скачать руководство пользователя страница 129

Associated Profiles

 on page 129

Policy Role Settings

Table 55: Role Parameter Settings

Field

Description

Name

Name of the role.

Bandwidth Limit

Select this option to allow unlimited bandwidth. Click   to set the
Class of Service value.

Default Action

Determines the access control default action. If you do not define
policy rules for a role, the role's default action is applied to all traffic
subject to that role. However, if you require user-specific filter
definitions, then the filter ID configuration identifies the specific role
that is applied to the user. Valid values are:

•

Allow. Allow packets using the specified VLAN option. Specify
either the Default Network VLAN or a configured VLAN.

•

Deny. Deny packets that do not match a filter rule or deny packets
when a filter rule does not exist. When a packet 

does

 match the

filter rule action Allow, allow packet using the specified VLAN
option. Specify either the Default Network VLAN or a configured
VLAN.

VLAN ID

Policy roles default to the VLAN specified during network
configuration. You can specify a unique VLAN here. Click   to add a
new VLAN option.

Associated Profile

Indicates profiles that this role is associated with. Click   to modify
profile association.

Note: Associate a role with a configuration Profile. The configuration
Profile is associated with the device group. Each AP in the device
group makes use of the policy role.

Rules

Policy rules are organized by Open Systems Interconnection (OSI)
layer classification. Select the drop-down arrow to display rules that
pertain to each OSI layer.

Related Links

Policy Rules for OSI L2 to L4

 on page 130

Application (Layer 7) Rules

 on page 132

NEW!

Associated Profiles

A list of configuration Profiles that this role or network can be associated with. Select a Profile to make
the association. Clear a check box to disassociate the Profile.

Networks and roles must be associated with a configuration Profile. Device groups have a configuration
Profile assignment. Therefore, APs within the device group are associated with the network definition
and the role policy definition through the configuration Profile. Once you have configured the network

Configure

ExtremeCloud Appliance User Guide for version 4.36.03

129

Содержание ExtremeCloud Appliance E1120




























































































































































































































Отзывы:

Нет отзывов