VSP 4000 power supplies
The VSP 4000 supports both AC and DC power supplies. One power supply is installed in the
system.
You can install a redundant power supply to support additional power requirements or to provide
power redundancy.
The following table describes the VSP 4000-compatible AC and DC power supplies and their part
numbers (order codes). All the power supplies are EUED RoHS 5/6 compliant.
Note:
The 300-watt and 1000-watt AC power supplies use the IEC 60320 C16 AC power cord
connector.
Use the order codes to order a replacement for the primary PSU or to order a redundant PSU for
your VSP 4000 system.
Note:
Power cords must be ordered separately. Ensure you order the correct power cord for your
region. For more information, see
Power cord types and order codes
on page 11.
Table 2: Power supply order codes
VSP 4000 PSU
Usage
Part number
(order code)
300W AC power supply For use in the ERS 4626GTS, 4850GTS, VSP 4850GTS
and WL8180, WL8180-16L wireless controllers.
AL1905A08-E5
Stackable 1000W AC
POE+ power supply
For use in 4X00 PWR+.
AL1905A21–E6
1000W AC PoE+
power supply
For use with VSP 4450GTX-HT-PWR+
EC4005A03–E6
300W DC power
supply
For use in the VSP 4850GTS-DC, ERS5698TFD, 5650TD,
and 5632FD.
DC connector included.
AL1905005-E5
Power cord types and order codes
To connect AC power to the switch, you need an appropriate AC power cord as described in the
following table.
VSP 4000 power supplies
August 2018
Installing Virtual Services Platform 4850GTS Series
11
