Extreme Flight 78" EXTRA 300 ARF, Инструкция по эксплуатации

Страница: 23 / 27

26. Remove the covering over the holes in each side of the rear of the fuselage for the
elevator servos. Attach a 36" extension to the servo lead and install the servos with the
output shafts toward the rear of the fuselage using the manufacturer supplied mounting
hardware. Slide both stab/elevator assemblies onto the carbon fiber mounting tube and
secure with 2 3mm bolts inserted through a washer and the mounting tabs and into the
corresponding blind nuts already installed in the fuselage. Thread a ball link on each end
of a titanium pushrod and secure to the servo arm and elevator control horns with a 3mm
bolt and nylon insert locknut. Again we recommend the SWB 1.5 inch servo arm for
elevator actuation. Be sure to use a drop of blue Loctite on all bolts!!!
23