Extreme Flight 42 Vyper Bype, Инструкция по сборке

Страница: 14 / 29

Insert the carbon wing spar tube into the fuselage. Insert the horizontal stabilizer into its slot. Check the
stab for level against the tube. Adjust as necessary by sanding the slot. Use a ruler to center the stab
side-to-side, and front-to-back on each side; check all alignments of the stab carefully.
When you are satisfied with the stab alignment, place several drops of thin CA glue into the joint of the
stab and fuselage, allow to wick into the joint. NOTE: We do not remove any covering on the stab.
14