If desired, you can mount your receiver on the balsa receiver plate (marked Rx) and glue the plate into
the bottom of the fuselage as shown.
Plug your servos and ESC into your receiver, attach your battery and test your radio system. Check for
correct motor running direction now, before your prop is installed.
Never run your motor inside a
building with the prop installed.
Check for correct servo direction, reverse as necessary. Center all
control surfaces and tighten pushrod adjusters securely.
Balancing:
Balance your Edge at a point 80mm-90mm behind the leading edge of the wing where the wing meets the
fuselage. 80mm is a sport flying CG, 90mm is a 3D flying CG.
26
