Super Sixteen Build Guide
Guide v1.1 - April, 2021
CPU Board (smaller PCB)
1.1 - Resistors
Install the through-hole resistors by bending the leads and inserting them through the
vias, bending the leads, flipping the PCB, and soldering them. They can go in either way
but it's good to keep all the color codes facing the same way.
1. Install the twelve 1K (1 kiloohm) resistors (
brown
, black,
red
,
gold
)
R103, R104, R105, R106, R107, R108, R109, R110, R111, R112, R113, R116
2. Install the five 10K resistors (
brown
, black,
orange
,
gold
)
R102, R114, R115, R117, R118
3. Install the one 1M (1 megaohm) resistor (
brown
, black, black,
yellow
,
brown
) (blue body)
R101
Install the resistors in this step in the highlighted locations.
