ExtraHop Trace 6150, Руководство пользователя

Страница: 5 / 5

Deploy the ExtraHop Trace 6150 Appliance 5
5. Note the information listed in the Fingerprint field. Verify that the fingerprint listed on this page matches
the fingerprint of the Trace appliance listed on the Fingerprint page in the Admin UI of the Trace
appliance.
6. Type the password of the Trace appliance
setup
user in the Trace Setup Password field.
7. Click Connect .
8. To connect additional Trace appliances, repeat steps 2 through 7.
Note: You can connect a Discover appliance to four or fewer Trace appliances. However, you
can connect a Command appliance to an unlimited number of Trace appliances.
9. If you have a Command appliance, log into the Admin UI of the Command appliance and repeat steps 3
through 7 for all Trace appliances.
Verify the configuration
After you have deployed and configured the Trace appliance, verify that the Trace appliance can collect
packets through the Discover and Command appliances.
Before you begin
You must have a minimum user privilege of
view and download packets
to perform this procedure.
1. Log into the Web UI on the Discover or Command appliance.
2. Make sure
Packets appears in the top menu.
3. Click Packets to start a new packet query. You should now see a list of the collected packets.
If the Packets menu item does not appear, revisit the Connect the Discover and Command appliances to the
Trace appliance section. If no results are returned when you perform a packet query, check your network
settings. If either issue persists, contact ExtraHop Support .