Deploy the ExtraHop Discover 10200 Appliance
2
•
Two 10 GbE ports. Ports 1 and 2 can be configured as a management port, management and flow target,
or management and RPCAP/ERSPAN/VXLAN target.
•
Two 10/100/1000 BASE-T network ports. Port 3 is the primary management port. Both ports can be
configured as a monitoring port, management port, management and flow target, or management and
RPCAP/ERSPAN/VXLAN target.
•
Four 100 GbE-capable ports on two network adapters. These ports are the high-performance monitoring
(capture) interfaces.
Supported packet source connectivity
The Discover 10200 can accept packets through ports 1 - 8. The ports can be connected according to the
table below.
Discover 10200
Appliance Connector
Peer Connector for
Packet Source
Customer-Supplied
Cabling
Supported Operating
Speeds
Transceiver-based Connectivity
100 GbE QSFP28 SR4
transceiver
Multi-mode fiber
MPO connectors
100 Gbps, 40 Gbps
100 GbE QSFP28 SR4
transceiver
40 GbE QSFP+ SR4
transceiver
Multi-mode fiber
MPO connectors
40 Gbps
40 GbE QSFP SR
BiDi transceiver
(Customer-supplied Cisco
QSFP-40G-SR-BD only)
40 GbE QSFP+ SR BiDi
transceiver
Duplex multi-mode fiber
LC connectors
40 Gbps
25 GbE SFP28 SR
transceiver
Multi-mode fiber
LC connectors
25 Gbps, 10 Gbps
25 GbE SFP28 SR
transceiver (with
QSFP28-to-SFP28
adapter)
10 GbE SFP+ SR
transceiver
Multi-mode fiber
LC connectors
10 Gbps
Direct Attach Connectivity
Customer-supplied QSFP28 DAC cable, such as the Mellanox MCP1600-Cxxx
series
100 Gbps
QSFP28-to-SFP28 adapter with customer-supplied SFP28 DAC cable, such as
the Mellanox MCP2M00-Axxx series
25 Gpbs
Customer-supplied RJ45 Ethernet cable 1 Gbps
1 Gpbs
Note:
The packet processing capability of the appliance is 100 Gbps. While it is possible to
oversubscribe the appliance by sending more than 100 Gbps of packet data across the four
100 GbE-capable ports, inbound workloads that exceed 100 Gbps will result in dropped
packets.
Set up the appliance
1. Rack mount the Discover appliance.
Install the Discover appliance in your data center with the included rack-mounting kit. The mounting kit
supports most four-post racks with either round or square holes.
