Extraflame COMFORT P70 AIR, Руководство пользователя

Страница: 22 / 44

22 ENGLISH
BATTERY TYPE AND REPLACEMENT
To insert/replace the batteries, su ffi ce it to remove the battery
protection cover at the back of the radio control device ( fi gure 1).
Insert the batteries in accordance with the symbols imprinted on
the radio control device and on the battery itself.
Three AAA batteries are required for the radio control to
function.
CONFIGURATION
RADIO CONTROL CODING PROCEDURE:
1. Disconnect the power supply to the stove.
2. Press the keys
OK
and
OK
at the same time until the screen to choose RADIO ID appears.
3. Using keys
OK
and
OK
select the new
RADIO ID
.
4. Power the stove. Con fi rm the selected unit within 10 seconds (the LED will fl ash on the radio/emergency card) by pressing the OK key
on the remote control.
5. The LED on the radio/emergency card will remain on for 5 seconds to con
fi rm the new con fi guration.
6. If the con fi guration was unsuccessful, the display will read " ". In this case, repeat the procedure.
J
THE RADIO CONTROL IS ALREADY CONFIGURED WITH "RADIO ID" 0". IF THERE IS ANOTHER STOVE, TO AVOID
INTERFERENCES, A NEW CONFIGURATION MUST BE PERFORMED, MODIFYING ONE OF THE TWO STOVES.
SOME RADIO FREQUENCY DEVICES ( E.G. MOBILE PHONES, ETC. ) MAY CAUSE INTERFERENCE WITH
COMMUNICATION BETWEEN THE RADIO CONTROL AND THE STOVE.
Respect the environment!
Used batteries contain metals that are harmful to the environment, and therefore must be disposed of separately in
special containers.
RADIO CONTROL
( fi gure 1)
RADIO CONTROL ROOM PROBE
CALIBRATION
This mode allows calibration of the room temperature detected
by the radio control (with ventilation active only). For correct
calibration, it is recommended to position the radio control in a
room with constant temperature and wait for at least two hours.
The procedure for calibration is the following:
Š Access the menu and reach “
TECH MENU
”.
Š
Set the access key "F4". - " ADJ REMOTE PROBE "
Š
Using the keys
OK
or
OK
adjust the desired ambient
calibration.
Š Save and exit with the key
OK
.