Extraflame ANGY, Руководство пользователя

Страница: 22 / 36

22 ENGLISH
J
WHEn tHE WEEKLy PRoGRaMMER iS actiVE, tHE RELatiVE icon WiLL BE SHoWn on tHE RaDio contRoL
DiSPLay
cHrOnO
This function allows stove ignition and switch-off to be automatically programmed.
The factory setting for CHRONO is off.
The chrono allows the programming of 4 time slots per day, which can be used every day of the week.
In each time slot, it is possible to set
the ignition and switch-off times, the days of use of the programmed time slot, the desired temperature (if aUtOmatIc mode is
used) and the set power. current day and time settings are essential for the correct operation of the chrono.
Recommendations
Before using the chrono function, it is necessary to set the current day and time. therefore, check that the points in the sub-section
“ DATE-TIME ” have been followed. to use the chrono function correctly, it must not only be programmed, but also enabled. the 4 time
slots can be overlapped using the ignition and switch-off time settings. in this way, it is possible to create a combination of time slots
with different temperatures and power levels, without changing the status of the stove.
n.B.: in the case of overlapping time slots, the stove will remain on until the last switch-off time.
enaBlInG
Allows the chrono and the different stove time slots to be enabled/disabled.
To set: OK > CHRONO > ENABLING
cHrOnO mOde
It allows the user to choose in which MODE (see paragraph) the stove will be switched on in the set time slots, choosing between:
Š
MANUAl
Š
AUTOMATIC
Š
AUX
prG 1-4
Prg x allows you to set the ignition and switch-off time, the days of use of the programmed time slot, the temperature and also the desired
power. Current day and time settings are essential for the correct operation of the Chrono.
To set:
OK > CHRONO > PRGX
CHRONO > ENABlINg > PRg 1 ON/OFF Enable/disable PRG 1
>
PRg 2 ON/OFF Enable/disable PRG 2
>
PRg 3 ON/OFF Enable/disable PRG 3
>
PRg 4 ON/OFF Enable/disable PRG 4
>
CHRONO MODE > MANUAl/AUTOMATIC/AUX -
Set CHRONO
mode
>
PRg1 > START PRg1 OFF-00:00-23:50 Ignition time PRG1
>
STOP PRg1 OFF-00:00-23:50 Switch-off time PRG1
>
MONDAY...SUNDAY ON/OFF Enable/disable the days of PRG1
>
*SET PRg1 07- 37 °C Set thermostat PRG1
>
POWER PRg1 1-5 Set power PRG1
>
PRg2 > START PRg2 OFF-00:00-23:50 Ignition time PRG2
>
STOP PRg2 OFF-00:00-23:50 Switch-off time PRG2
>
MONDAY...SUNDAY ON/OFF Enable/disable the days of PRG2
>
*SET PRg2 07- 37 °C Set thermostat PRG2
>
POWER PRg2 1-5 Set power PRG2
>
PRg3 > START PRg3 OFF-00:00-23:50 Ignition time PRG3
>
STOP PRg3 OFF-00:00-23:50 Switch-off time PRG3
>
MONDAY...SUNDAY ON/OFF Enable/disable the days of PRG3
>
*SET PRg3 07- 37 °C Set thermostat PRG3
>
POWER PRg3 1-5 Set power PRG3
>
PRg4 > START PRg4 OFF-00:00-23:50 Ignition time PRG4
STOP PRg4 OFF-00:00-23:50 Switch-off time PRG4
MONDAY...SUNDAY ON/OFF Enable/disable the days of PRG4
*SET PRg4 07- 37 °C Set thermostat PRG4
*Only in AUTOMATIC
mode
POWER PRg4 1-5 Set power PRG4