Section 916
GARMIN GNC 420W/GNS 430W
Page Date: 19. February 2014
916 - 7
Pilot´s Operating Handbook US
EXTRA 330LX
The flight plan key (FPL) allows you to create, edit, activate and invert flight plans, as well as access
approaches, departures and arrivals. A closest point to flight plan feature is also available from the
flight plan key.
N O T E
Whenever the GNC 420W/GNS 430W is displaying a list of information that is too long for
the display screen, a scroll bar will appear along the right-hand side of the display. The
scroll bar graphically indicates the number of additional items available within the
selected category. Simply press the small right knob to activate the cursor and turn the
large right knob to scroll through the list.
The procedures key (PROC) allows you to select and remove approaches, departures and arrivals
from your flight plan. When using a flight plan, available procedures for your departure and/or arrival
airport are offered automatically. Otherwise, you may select the desired airport, then the desired
procedure.
POWERING UP THE GNC 420W/GNS 430W
The GNC 420W/GNS 430W power and COM volume are controlled using the power/volume knob
at the top left corner of the unit. Turning it clockwise will turn unit power on and increase the COM
radio volume. After turning the unit on, a
welcome page
will be displayed while the unit performs
a self test, followed by the database confirmation pages which show the current database
information on the NavData card (with the valid operating dates, cycle number and database type
indicated). The database is updated every 28 days, and must be current for instrument approach
operations. Information on database subscriptions is available inside your GNC 420W/GNS 430W
package.
To acknowledge the database information, press ENT.
916.7.2
DEFAULT NAV PAGE
During most flights, the
default NAV
,
map
and
NAVCOM pages
will be the primary pages used for
navigation. The
default NAV page
displays a graphic course deviation indicator (CDI), the active leg
of your flight plan (as defined by the current „from“ and „to“ waypoints), and six user-selectable data
fields. The default settings for these fields are distance to waypoint (DIS), desired track (DTK),
bearing to waypoint (BRG), ground speed (GS), ground track (TRK) and estimated time en route
(ETE). The
default NAV page
is selected by pressing and holding the CLR key or turning the small
right knob.
Содержание 330lx
