Instruction Manual
ExTox Control Unit ET-1D Series
Page 4 of 17
1
Introduction
This Instruction Manual generally describes operation, installation and maintenance of the
following ExTox-Products:
Wall mounted
DIN-Rail
Control Panel
19''-Rack
Artikel-Nr.
230 V / 24 V
230 V / 24 V
230 V / 24 V
230 V / 24 V
ET-1D
303010 303011 303014 303015
ET-1DA
305010 305011 305014 305015
Type specific data for each device should be taken from a corresponding separate and spe-
cific Data Sheet. This Data Sheet forms consequently part of this Instruction Manual. Refer-
ences on the Data Sheet within this text are marked with
)
DB.
Please read this Instruction Manual carefully before installation and initial operation of the
control unit. We kindly ask you to pay attention to all details and cross-references.
We kindly ask you not to repair the control unit or to perform any changes which go beyond
the measures described herein. Otherwise you endanger your own safety and your warranty
claims of merchantability. In such cases please contact ExTox or authorised ExTox Service
Partner. Third parties take the responsibility for correct performance of work when mainte-
nance and repairs are done by them.
On receipt of goods please take care that packing and consignment are not damaged and
the goods supplied correspond to the articles described in the delivery note. Please do also
compare with your order. In case of any damage please inform your forwarding agent and
your supplier. Please keep the damaged packing.
Please keep in mind that control units are sensitive measuring devices and take special care
when unpacking and installing them.
