AvediaPlayer r92xx series V1.1
14
Administrator‟s Guide
4 AvediaPlayer Physical Interfaces
This chapter describes the connectors and physical characteristics of the AvediaPlayer r92xx
series receivers. It contains the following sections:
Front Panel
The front panels of the AvediaPlayer r92xx series receivers are all fitted with an IR receiver
window and status LED as shown in Figure 1.
Figure 1 Front Panel Interfaces
1.
IR Window -
The IR window enables full user control of the AvediaPlayer receiver using
the Exterity Remote Control. IR control functions can be extended using an additional IR
receiver eye connected to the rear panel. The front panel IR receiver is disabled when a
rear panel connection is made. (Refer to
on page 16)
2.
Status LED
- The Status LED flashes during start-up or to indicate the receiver is
responding to remote control commands. The LED behaviour, which can be customised, is
described in Table 2.
Table 2 Front Panel LED Activity
Function
LED activity
Start-up
On 12 seconds, off 20 seconds, on 15
seconds. Followed by IP address
acquisition.
Acquiring IP address via DHCP
4x per second
Standard operation (Default LED status: On)
Always on, blinking off briefly on
reception of IR from the handset.
Standard operation (Default LED status: Off)
Always off, blinking on briefly on
reception of IR from the handset.
Note:
The LED behaviour is a configurable option. Refer to LED Behaviour on page 53 for
more details.
