ExtenHD XSW41
User Manual
ExtenHD XSW41
User Manual
11
22
33
44
11
22
33
44
SIGNAL
ENHANCE
SIGNAL
ENHANCE
POWER
POWER
XSW41
4x1 Switcher
1
5
4
6
2
7
3
1
2
1
2
3
4
1
2
3
4
DC 5V 1A
OUTPUT
OPTICAL
RS-232
HDMI OUT
1
2
3
4
INPUT
OPTICAL
COAXIAL
LOCKED
NORMAL
COAXIAL
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
TxD
RxD
NC
GND
NC
NC
NC
NC
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
RxD
TxD
NC
GND
NC
NC
NC
NC
Pins definition of
modem cable
Remote Controller
"I" + "1"
"I" + "2"
"I" + "3"
"I" + "4"
"S" + "1"
"S" + "0"
"P" + "1"
"P" + "0"
PORT 1 ON
PORT 2 ON
PORT 3 ON
PORT 4 ON
ENABLE SIGNAL ENHANCE
ENABLE SIGNAL ENHANCE
POWER ON
POWER OFF
Command Code
Comment
* Command:
Remote control sensor.
Input select/Indicators:
Press the “ INPUT” button repeatedly to
switch to your desired input source and the LED will illuminate to
indicate which input source is being selected.
Signal Enhancement/Indicator:
Press the “ Signal Enhance”
button to turn on this feature to improve signal quality after long
distance transmission. Press again to turn off. The LED will
illuminate when the signal is enhanced.
Power LED Indicator:
The LED will illuminate when the power is
connected.
1.
2.
3.
4.
HDMI output:
Connect the HDMI output to the HDMI input of your display using
HDMI cable.
HDMI inputs:
Connect your various HDMI sources to each of the HDMI input of the
unit using HDMI cables.
Power:
Plug the supplied 5VDC power supply into the unit.
Digital audio inputs:
Connects your various toslink sources to each of the toslink
input of the unit using optical cables.Connects your various SPDIF sources to each
of the coax input of the unit using coax cables.
Digital audio output:
Connects the toslink output to the toslink input of your display
using optical cable.Connects the digital SPDIF output to the digital coax input of the
display using coax cable.
RS232:
9-pin D-sub female connector for connecting to your other control console
for remote control
IR Remote Locked. Button control Locked.
1.
2.
3.
4.
5.
6.
7.
* RS-232 transmission format:
Baud Rate: 9600 bps
Data Bit : 8 bits
Parity : None
Stop Bit : 1 bit
1
2
Power: Press the button to turn on/off the unit.
Direct input selector:Press numerical number
button to select your desired input source.
1.
2.
Front Panel
Operation Controls and Functions
Rear Panel
* The connection between XSW41 and remote controller through RS-232 modem cable.
RS-232 Remote Control Protocol
Remote Control
Page 4
Page 5