7
Infrared Setup for Windows Me
For Windows Me, no additional drivers or applications are required to use the
XTNDAccess IrDA PC Adapter. However, the following setup must be
performed in order for the Adapter to work with your computer.
1. Verify the serial connector of the Adapter is attached to a serial port of
the computer.
2. On the Microsoft Windows Me CD-ROM, locate the Tools\Pssutil
folder. From within this folder, double-click the
Irdasir.reg
file and then
click
Yes
to update the registry.
3. Reboot if prompted, then perform the following steps:
a. From the
Start
menu, select
Settings
,
Control Panel,
and then
Add
New Hardware
.
b. On the Add New Hardware Wizard, click
Next.
c. Click
Next
again to allow Windows to search for Plug and Play
devices. A list may or may not appear.
d. Select
No, The device isn’t in the list
, and click
Next.
e. Select
No, I want to select the hardware from a list
, and click
Next.
f.
Select
Infrared devices
as the Hardware type and click
Next.
g. Click
Next
to continue the installation of the infrared device.
h. Select
Infrared COM port or dongle
as the Manufacturer
i.
Select
Generic Infrared Serial Port or dongle
as the Infrared
Device and click
OK.
Содержание XTNDAccess
Страница 1: ...User s Guide XTNDAccess IrDA PC Adapter...
