EXTEL - WAVE 2 - 720321
en - 9
D - INSTALLATION
2 - From the Extel Connect application, click
on + to add a device.
3. Click on device already connected. Make sure
that the smartphone is connected to the same WiFi
network as the monitor.
4. Enter the name you want to give your device.
Scan the monitor's QR code or enter the monitor
ID (information available in the WiFi settings and
password).
Important: When you click on the QR Code to the
right of the UID line, you will be able to scan the
videophone monitor's QR Code and get its UID
faster. In the Mdp box, enter the password that was
set up during the first installation.
Click on “Enregistrer” (Save).
If the videophone is not nearby, you can scan the
barcode in the Extel Connect owner's application.
The barcode is available under the “Inviter un ami” (Invite
a friend) menu in the already connected application.
5. Your smartphone can now receive calls from your
videophone.
Interface function
Contains the different devices and enables
switching to monitoring mode.
Enables you to add a device.
Click the image to enter monitoring mode.
Warning: using the monitoring option consumes
energy from the intercom panel's battery and may
reduce its battery life.
