UM200-en-GB_V1.5 2/17
10
Battery Charging
1. The battery should be recharged when the
low battery icon appears in the display, after
extended use or after a long period of storage.
2. Connect the AC Adaptor to the meter.
3. Turn the rotary switch to an ON position
NOTE: The battery will not charge with the rotary switch in the OFF position
Battery Replacement
The charging circuit is designed only for the lithium battery included with the meter. A Non-approved
lithium battery could cause damage to the instrument or hazard to the users.
Replacement battery part# BATT-111V
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate collection
sites, the retail store where the batteries were purchased, or wherever batteries are sold.
Disposal:
Do not dispose of this instrument in household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of electrical and
electronic equipment.
Maintenance & Cleaning
1.
Servicing not covered in this manual should only be performed by qualified personnel. Repairs
should only be performed by qualified personnel.
2.
Periodically wipe the case and cable with a damp cloth and detergent; do not use abrasives or
solvents.
