TG30 V1.3 10/02
4
Support Hotline (781) 890-7440
Tech support: Ext. 200; Email: [email protected]
Repair/Returns: Ext. 210; Email: [email protected]
Website: www.extech.com
Continuity Test
1.
Switch the transmitter to the “CONT” position
2.
Connect to the wire pair with the alligator clips. The buzzer
will sound and the CONTINUITY led will light if there is
continuity (less than approximately 1k
Ω
.
Battery replacement
Probe:
Install new batteries by turning the speaker
and pocket clip ¼ turn to the left, remove
the battery door and replace the four LR44
batteries. Observe battery polarity.
Transmitter:
Remove the rear battery compartment door and replace the 9V battery.
Warranty
EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects in parts and
workmanship for one year from date of shipment (a six month limited warranty applies on sensors and cables). If it
should become necessary to return the instrument for service during or beyond the warranty period, contact the
Customer Service Department at (781) 890-7440 ext. 210 for authorization. A Return Authorization (RA) number
must be issued before any product is returned to Extech. The sender is responsible for shipping charges, freight,
insurance and proper packaging to prevent damage in transit. This warranty does not apply to defects resulting
from action of the user such as misuse, improper wiring, operation outside of specification, improper maintenance
or repair, or unauthorized modification. Extech specifically disclaims any implied warranties or merchantability or
fitness for a specific purpose and will not be liable for any direct, indirect, incidental or consequential damages.
Extech's total liability is limited to repair or replacement of the product. The warranty set forth above is inclusive
and no other warranty, whether written or oral, is expressed or implied.
Copyright © 2002 Extech Instruments Corporation. All rights reserved
including the right of reproduction in whole or in part in any form.
www.burntec.com
