5 SDL470-en-GB_v1.4 3/17
Type K/J Thermometer Measurements (Probe is optional)
•
Plug a thermocouple (not supplied) into the temperature probe jack at the top of the meter.
•
Switch the meter ON by pressing and holding the Power button for at least 2 seconds.
•
Select the Thermocouple function as described in the Function/Measurement Selection
section.
•
The meter display will show the temperature measurement along with the ‘K’ or ‘J’
thermocouple indicator. The meter defaults to Type K thermocouple; refer to the Setup
Mode section for instructions on how to change the thermocouple type.
Data Hold
•
Press the HOLD button momentarily to freeze the displayed reading.
•
The HOLD display icon will appear.
•
Press the HOLD button again to release the display
•
The HOLD display icon will switch OFF.
MAX-MIN Reading Store/Recall
For a given measurement session, this meter can record the highest (MAX) and the lowest (MIN)
readings.
•
Press the MAX-MIN button momentarily (REC icon appears)
•
The meter is now recording the MAX and MIN readings.
•
Press the MAX-MIN button again to view the current MAX readings (MAX icon appears).
The readings on the display are now the highest readings encountered since the REC icon
was switched on (when the MAX-MIN button was first pressed).
•
Press the MAX-MIN button again to view the current MIN readings (MIN icon appears).
The readings on the display are now the lowest readings encountered since the REC icon
was switched on (when the MAX-MIN button was first pressed).
•
To exit the MAX-MIN mode, press and hold the MAX-MIN button for at least 2 seconds.
The meter will beep, the REC-MAX-MIN icons will switch off, the MAX-MIN memory will
clear, and the meter will return to the normal operating mode.
