RHT50-en-GB_V2.4 4/15
3
Operation
INSTALLING THE GRAPHING SOFTWARE
Install the supplied Windows
TM
PC Datalogger Software by placing the supplied program disk in the PC’s CD-ROM
drive. If the installation program does not automatically open and provide on-screen prompts, open and browse the
CD-ROM drive, then find and double-click on the SETUP.EXE file included on the program disk. Follow the
on-screen prompts to complete the installation.
Before running the graphing software, please connect the RHT50 to the PC and install the USB Driver software as
described in the next section.
INSTALLING THE USB DRIVER
Plug the RHT50 into an available USB port on the PC. If this is the first
time that the RHT50 has been connected to
the particular port on the PC, the following screen will appear:
Make sure the program disk is still in the PC CD-ROM drive. Select the ‘recommended’ installation and follow the
on-screen prompts to complete the driver installation. If this is a repeat connection of the RHT50 to the USB port,
the driver installation process will be automatically skipped.
Refer to the HELP utility in the software program for detailed instructions on using the software to download and
process recorded data. The LED status guide provided below is offered for easy reference.
