7
AC Sensing:
True RMS on MP520 and MP530
Auto Power Off:
After 17 minutes of inactivity with no input signal
Safety:
The MultiPro™ Series meters are intended for indoor use
and protected, against the users, by double insulation per
EN61010-1 and IEC61010-1 2nd Edition (2001) to CAT III
1000V & CAT IV 600V. The meter (all versions) also
meets UL3111-1(1994)* and CSA C22.2 No. 1010-1-92*
to CAT III 1000V.
Terminals (to COM) ratings:
V :
CATEGORY III 1000 VOLTS AC & DC, AND
CATEGORY IV* 600 VOLTS AC & DC.
A / MA
µ
A : CATEGORY III AND CATEGORY IV* 500
VOLTS AC AND 300 VOLTS DC.
*
Category IV safety standard (for DMMs) was first released in
IEC61010-1 2nd Edition in year 2001, and was yet an UL published
standard at the time this manual was written.
UL Certification:
The meter that bears the UL markings, if any, has
been investigated by UL headquarter in the USA per
UL standard UL3111-1 1st Ed to its highest CAT III
rating and international standard IEC61010-1 Second
Edition (year 2001) to CAT IV rating. The UL
markings on the meter, where applicable, are marked
as “UL Listed Cat III only” and “UL Classified to
IEC61010-1 2nd Ed. Cat IV”.
E.M.C.:
Meets EN61326(1997, 1998/A1), EN61000-4-2(1995) and
EN61000-4-3(1996). Also meets former standards EN55011
(1991) and EN50082-1(1997)
In an RF field of 3V/m: Capacitance function is not specified
Other function ranges: Total Accuracy = Specified Ac
30 digits. Performance above 3V/m is not specified
Overload Protection:
µA/mA Range:
0.63/500V, IR 200kA, F fuse.
A Range:
12.5A/500V IR 20kA, F fuse.
V Range:
1050V rms, 1450V peak
mV,
Ω
and other:
600VDC/VAC rms
Power Consumption
: 2.7 mA typical
Dimension:
7.32 x 3.43 x 1.4" with holster (186mm x 87mm x 35.5mm)
Weight:
15.17 oz. with holster (430g)
