background image

MN16A  V1.4   03/12 

14

Support lines: U.S. 877-439-8324, Intl. 603-324-7800 

Technical support: Option 3; E-mail: 

[email protected]

 

Repair & Returns: Option 4; E-mail: [email protected] 

Product specifications subject to change without notice 

Visit our website: www.extech.com 

Extech Instruments Corporation, 9 Townsend West, Nashua, NH 03063 

ISO 9001 Certified since 1995 

Warranty  

EXTECH INSTRUMENTS CORPORATION

 (a FLIR company) warrants this instrument to be free of defects in parts and workmanship for 

one year

 from date of shipment (a six month limited warranty applies to sensors and cables). If it should become necessary to return the 

instrument for service during or beyond the warranty period, contact the Customer Service Department for authorization. Visit our website 

www.extech.com for contact information. A Return Authorization (RA) number must be issued before any product is returned to Extech. The 

sender is responsible for shipping charges, freight, insurance and proper packaging to prevent damage in transit. This warranty does not 

apply to defects resulting from action of the user such as misuse, improper wiring, operation outside of specification, improper maintenance 

or repair, or unauthorized modification. Extech specifically disclaims any implied warranties or merchantability or fitness for a specific 

purpose and will not be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or 

replacement of the product. The warranty set forth above is inclusive and no other warranty, whether written or oral, is expressed or implied. 

Calibration and Repair Services 

Extech offers repair and calibration services

 for the products we sell. Extech also provides NIST certification for most products. Call the 

Customer Service Department for information on calibration services available for this product. Extech recommends that annual calibrations 

be performed to verify meter performance and accuracy. 

 

 

 
 
 
 
 
 
 

 

Содержание MN16A















Отзывы: